Legacy Outback Ltd Sedan AWD F4-2.5L SOHC (2001)
Blower Motor: Technical Service Bulletins
A/C - Blower Motor Noise
SOURCE: Subaru Tech Tips
TITLE: Blower Motor Noise
APPLIES TO: 01-03 Legacy
SERVICE TIP:
If you encounter a 2001-2003MY Legacy with a concern of noise from the blower motor, the foam seal contacting the squirrel cage may be the cause.
Inspection/Repair procedure:
1. Remove the glove box to gain access to the blower motor.
2. Drop the glove box Inner and Outer assemblies together and disconnect the glove box light wiring harness.
3. Remove the 4 Phillips head screws from the bottom of the blower motor.
4. Move the wiring harness at the backside of the blower motor assembly away from the blower motor.
5. Pull the blower motor assembly down and remove it along with the squirrel cage.
6. Insert one hand into the blower motor housing and locate the loose foam on the recirculation door.
7. Remove the loose foam from the recirculation door.
8. Reverse process to reassemble.
9. Test the repair.
