Legacy Outback Ltd Sedan AWD F4-2.5L SOHC (2001)
3.0 Model
1. Connect pipe D or pressure hose to oil tank.
2. Connect pipe C or return hose to oil pump.
CAUTION: Use a new gasket.
Tightening torque: 39 Nm (4.0 kgf-cm, 28.9 ft. lbs.)
3. Tighten bolt A.
Tightening torque: 13 Nm (1.3 kgf-cm, 9.4 ft. lbs.)
2. Temporarily connect pipes C and D to pipes (on the gearbox side).
3. Temporarily install clamp E on pipes C and D.
CAUTION: Ensure that the letter "8" on each clamp are diagonally opposite each other as shown in figure.
4. Tighten clamp E firmly.
Tightening torque: 7.4 Nm (0.75 kgf-cm, 5.4 ft. lbs.)
5. Tighten joint nut.
Tightening torque: 15 Nm (1.5 kgf-cm, 10.8 ft. lbs.)