Legacy Outback Ltd Sedan AWD F4-2.5L SOHC (2001)
7. Turn over the floor mat to remove bolt.
8. Disconnect yellow connector of pretensioner harness, and remove outer belt (front).
CAUTION:
-
Do not drop or apply any impact to pretensioner.
-
Pretensioner and bracket should be treated as an assembly. Do not attempt to disassemble it.
INNER BELT (FRONT)
1. Disconnect connector.
2. Remove anchor bolt, and then detach inner belt.
INSTALLATION
OUTER BELT (FRONT)
Install in the reverse order of removal.
CAUTION:
-
The parts on left and right are not identical. Before installation, make sure that the correct part is used.
-
Be careful not to twist belts during installation.
INNER BELT (FRONT)
Install in the reverse order of removal.