Legacy Outback Ltd Sedan AWD F4-2.5L SOHC (2001)
CAUTION: The deployment tool should be kept shorted until just before deployment of the pretensioner.
6. Connect deployment tool connector (1D) and pretensioner yellow connector.
7. Install pretensioner on the wheel with the tire. Then, bundle three wire automotive harness [each with a sectional area of 1.25 sq.mm (0.00194 sq
in) or more], and bind them twofold around the pretensioner bracket and the wheel.
8. Put a tire without the wheel on the tire installed with pretensioner. Put on an additional tire with the wheel on top, and then fasten them tight with
rope.
9. Move the battery at least 5 m (16 ft) from the vehicle, and secure the nearby area. Connect the deployment tool alligator clip to the battery minus
terminal.