Legacy Outback Ltd Sedan AWD F4-2.5L SOHC (2001)
Power Steering Pump: Diagrams
OIL PUMP
NOTE: The illustration for 2.5 L model is shown. (Not shown for 3.0 L model because it cannot be disassembled.)
CAUTION
^
Wear working clothing, including a cap, protective goggles, and protective shoes during operation.
^
Remove contamination including dirt and corrosion before removal, installation or disassembly.
^
Keep the disassembled parts in order and protect them from dust or dirt.
^
Before removal, installation or disassembly, be sure to clarify the failure. Avoid unnecessary removal, installation, disassembly and replacement.
^
Be careful not to burn your hands, because each part on the vehicle is hot after running.
^
Use SUBARU genuine steering fluid, grease etc. or the equivalent. Do not mix steering fluid, grease etc. with that of another grade or from other
manufacturers.
^
Be sure to tighten fasteners including bolts and nuts to the specified torque.
^
Place shop jacks or safety stands at the specified points.
^
Apply steering fluid onto sliding or revolution surfaces before installation.
^
Before installing O-rings or snap rings, apply sufficient amount of steering fluid to avoid damage and deformation.
^
Before securing a part on a vice, place cushioning material such as wood blocks, aluminum plate, or shop cloth between the part and the vice.