Legacy Outback Ltd Sedan AWD F4-2.5L SOHC (2001)
sub-frame.
(c)
Dry the inside and outside of the sub-frame assembly using high pressure air at the same locations identified in the cleaning process.
Use a clean rag to remove any remaining moisture.
Step 5:
Vehicle Preparation
Important:
Be sure the following items have adequately cooled before applying protective covers.
(a)
Cover rotors, calipers, and exhaust parts near the sub-frame with a cloth or paper to prevent wax from adhering to these surfaces.
(b)
Place a suitable container (such as an oil drain pan) below the vehicle's subframe to capture any anti-rust agent and anti-rust wax that
could leak from the drain holes during the application process.
Step 6:
Application of anti-rust agent (NOX RUST X-210)
Use the flexible 360° type nozzle for spraying. Turn the spray gun stop screw counterclockwise 1/2 turn from closed, and adjust the air
supply pressure to 40psi Sprayed amount: 5oz. (150cc). Refer to the chart for spray times and follow the detailed, step-by-step process.
The holes in which the spray nozzle should be inserted and the direction from which the spray nozzle should be applied are identified in the figure (see