Legacy Outback VDC Wagon AWD F6-3.0L (2001)
3. Connect brake pipes to their correct ABSCM&H/U connections.
4. Using cable clip, secure ABSCM&H/U harness to bracket.
5. Connect connector to ABSCM&H/U.
CAUTION:
-
Be sure to remove all foreign matter from inside the connector before connecting.
-
Ensure that the ABSCM&H/U connector is securely locked.
6. Install air intake duct.
7. Connect ground cable to battery.
8. Bleed air from the brake system.