Legacy Outback VDC Wagon AWD F6-3.0L (2001)
Water Pump: Service and Repair
REMOVAL
1. Remove radiator.
2. Remove V-belt.
3. Remove front chain cover.
4. Remove timing chain.
5. Remove water pump.
INSTALLATION
1. Install water pump onto rear chain cover.
Tightening torque: 6.4 Nm (0.65 kgf-m, 4.7 ft. lbs.)
CAUTION: Replace O-rings with a new one.
2. Install timing chain assembly.
3. Install front chain cover.
4. Install V-belt.
5. Install radiator.
6. Fill coolant.
INSPECTION
1. Check water pump bearing for smooth rotation.
2. Check water pump pulley for abnormalities.