Legacy Outback VDC Wagon AWD F6-3.0L (2001)
Oil Pressure Sender: Service and Repair
REMOVAL
1. Set vehicle on the lift.
2. Disconnect battery ground cable.
3. Lift-up the vehicle.
4. Remove under cover.
5. Disconnect terminal from oil pressure switch.
6. Remove oil pressure switch.
INSTALLATION
1. Apply fluid packing to oil pressure switch threads.
Fluid packing: THREE BOND 1324 or equivalent
2. Install oil pressure switch.
Tightening torque: 25 Nm (2.5 kgf-m, 18.1 ft. lbs.)