Legacy Outback VDC Wagon AWD F6-3.0L (2001)
Fog/Driving Lamp Bulb: Service and Repair
Front Fog Light Bulb
REMOVAL
1. EXCEPT OUTBACK
1. Remove the two clips and lower the mudguard.
2. Remove back cover (A).
3. Disconnect harness connector.
4. Remove spring retainer then detach fog light bulb.
2. OUTBACK
1. Remove fog light assembly.
2. Disconnect harness connector.
3. Loosen screws and turn the bulb assembly counterclockwise, and then detach the bulb.
INSTALLATION
Install in the reverse order of removal.