Legacy Outback VDC Wagon AWD F6-3.0L (2001)
Auxiliary Air Valve (Idle Speed): Service and Repair
REMOVAL
1. Disconnect battery ground cable.
2. Disconnect connector (A) from idle air control solenoid valve.
3. Disconnect air by-pass hose (B) from idle air control solenoid valve.
4. Remove idle air control solenoid valve from throttle body.
INSTALLATION
Install in the reverse order of removal.
CAUTION: Replace gasket with a new one.
Tightening torque: 2.8 N.m (0.29 kgf-m, 2.1 ft-lb)