Legacy Outback VDC Wagon AWD F6-3.0L (2001)
10. Place transmission jack under transmission.
CAUTION:
^
Always support transmission case with a transmission jack.
^
On AT vehicle, make sure that the support plates of transmission jack don't touch the oil pan.
11. Remove the transmission rear crossmember bolts.
12. Lower the AT jack.
NOTE: Do not separate the AT jack and transmission.
13. Remove the oil cooler outlet pipe.
CAUTION: When removing outlet pipe, be careful not to lose balls and springs used with retaining screws.
14. Remove front and rear vehicle speed sensor, and torque converter turbine speed sensor with harness assembly.
^
Front vehicle speed sensor and torque converter turbine speed sensor