Legacy Outback VDC Wagon AWD F6-3.0L (2001)
Power Steering Pump: Testing and Inspection
INSPECTION
Basic Inspection
Perform the inspection procedures and repair or replace defective parts.
^
In accordance with the provided table, check all removed parts for wear and damage, and make repair or replacement if necessary.
Service Limit
Make a measurement as follows. If it exceeds the specified service limit, replace the parts with new ones.
CAUTION:
^
Fix oil pump on a vise to make a measurement. At this time, hold oil pump with the least possible force between two wood pieces.
^
Do not set outside of flow control valve or pulley on a vise; otherwise outside or pulley might be deformed. Select properly sized wood pieces.
1. Play of pulley shaft
On condition: P: 9.8 N (1.0 kg, 2.2 lb)