Legacy Outback VDC Wagon AWD F6-3.0L (2001)
3. Interconnect pressure hose and suction hose.
Tightening torque:
Joint nut 39.2 Nm (4 kgf-cm, 28.9 ft. lbs.)
CAUTION: If a hose is twisted at this step, the hose may come into contact with some other parts.
3. Connect connector to power steering oil pressure switch.
4. Install tensioner adjuster.
5. Install V-belt.
6. Install pulley belt cover.
7. Connect ground terminal of battery.
8. Feed the specified power steering fluid.
CAUTION: Never start the engine before feeding the fluid; otherwise vane pump might be seized up.
DISASSEMBLY
NOTE: Oil pump for 3.0 L model cannot be disassembled. If the oil pump is malfunctioning, replace the oil pump as an assembly.