subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Suspension - VDC Precautions|Page 4835 > < Recall 03V153000: Frame Corrosion Issue
Page 1
background image

Suspension Control ( Automatic - Electronic ): Technical Service Bulletins
Suspension - VDC Precautions

SOURCE: Subaru Tech Tips

TITLE: VDC Precautions

APPLIES TO: 01 Outback H6-3.0 with VDC

SERVICE TIP:

Use caution when performing PDIs and/or Service work on 2001MY Outback models w/VDC (Vehicle Dynamic Control). It is very important to install
the "VDC off" fuse, prior to raising ALL 4 wheels off the ground, engine running, and transmission in gear.

The attached photos illustrate the procedure that should be followed. Failure to follow this procedure can result in a VDC failure. All VDC failures must
then be reset using the select monitor.

Install 10A fuse into VDC OFF fuse slot.

Suspension - VDC Precautions|Page 4835 > < Recall 03V153000: Frame Corrosion Issue