Legacy Outback VDC Wagon AWD F6-3.0L (2001)
NOTE:
^
Do not remove with a screwdriver or other pointed tools.
^
When the hose is difficult to remove, wrap a shop cloth around the hose to protect it. Turn it with pliers, and then pull directly out with your
hand.
7. Remove ATF cooler pipe from frame.
8. Remove the oil cooler inlet and outlet pipes.
CAUTION: When removing outlet pipe, be careful not to lose ball and spring used with retaining screw.
2. 3.0L MODEL
1. Remove battery and washer tank.
2. Lift-up the vehicle.
3. Drain ATF completely.
NOTE: Tighten ATF drain plug after draining ATF.