Legacy Outback VDC Wagon AWD F6-3.0L (2001)
6. Push release lever until operating cylinder push rod retracts. Ensure that clutch fluid level in reservoir tank increases. If clutch fluid level increases,
hydraulic clutch is properly adjusted; if fluid level does not increase or push rod does not retract, replace master cylinder with new one.
7. Push release fork until operating cylinder push rod retracts. Check that clutch fluid level in reservoir tank increases.
8. If clutch fluid level increases, hydraulic clutch play is correct.
9. If clutch fluid level does not increase or push rod does not retract, clutch pedal must be readjusted.
10. Check the fluid level on the outside of the clutch master cylinder tank. If the level is below "MIN", add clutch fluid to bring it up to "MAX".
Recommended clutch fluid: FMVSS No. 116, fresh DOT 3 or DOT 4 brake fluid
