Legacy Outback VDC Wagon AWD F6-3.0L (2001)
8. Using ST1 and ST2, press outer oil seal until it contacts the bottom of housing.
ST1 927410000 OIL SEAL INSTALLER
ST2 927400000 HOUSING STAND
9. Apply sufficient grease to oil seal lip.
Specified grease: SHELL 6459N
CAUTION:
^
If specified grease is not available, remove bearing grease and apply Auto Rex A instead.
^
Do not mix different types of grease.
10. Install disc cover to housing the three bolts.
Tightening torque: 18 Nm (1.8 kgf-m, 13.0 ft. lbs.)
11. Attach hub to ST1 securely.
12. Clean dust or foreign particles from the polished surface of hub.
13. Using ST2, press bearing into hub by driving inner race.
ST1 927080000 HUB STAND
ST2 927120000HUB INSTALLER