Legacy Outback Wagon F4-2.5L SOHC (2000)
Alternator: Service and Repair
Disassembly
1. Heat the portion (A) of rear cover to 50 °C (122 °F) with heater drier.
2. Remove the four through bolts. Then insert the tip of a flat-head screwdriver into the gap between the stator core and front bracket. Pry then apart
to disassemble.
3. Hold rotor with a vise and remove pulley nut.
CAUTION: When holding rotor with vise, insert aluminum plates or wood pieces on the contact surfaces of the vise to prevent rotor from
damage.
4. Remove rotor from front cover.