Legacy Outback Wagon F4-2.5L SOHC (2000)
2) Using ST1, ST2 and ST3, press hub unit bearing into hub.
ST1 927080000 HUB STAND
ST2 927450000 HUB INSTALLER
ST3 28499AE000 SPACER
CAUTION:
^
Always press inner race when installing hub unit bearing.
^
Use a new hub unit bearing.
E: INSTALLATION
1. DISC BRAKE
1) Align hub unit bearing with back plate at mounting holes and install hub unit assembly and back plate. Temporarily tighten axle nuts.
CAUTION: Be careful not to damage tone wheel.
2) Tighten four bolts to back plate.
3) Remove axle nut.