Legacy Postal Wagon AWD F4-2.2L SOHC (1998)
1) Interconnect pipes C and D.
Tightening torque:
Joint nut 15 ± 5 Nm (10.8 ± 3.6 ft. lbs.)
CAUTION: Visually check that hose between tank and pipe D is free from bending or twisting.
2) Connect pipe D from oil tank. 3) Connect pipe C from oil pump.
CAUTION: Use a new gasket.
Tightening torque: 34 ± 5 Nm (25.3 ± 3.6 ft. lbs.)
4) Tighten bolt A.
Tightening torque: 13 ± 3 Nm (9.4 ± 2.2 ft. lbs.)
5) Temporarily connect pipes C and D to pipes (on the gearbox side).
6) Temporarily install clamp E on pipes C and D.
CAUTION: Ensure that the letter "8" on each clamp side are diagonally opposite each other as shown in the figure.
7) Tighten clamp E firmly.
Tightening torque: 7.4 ± 2.0 Nm (5.4 ± 1.4 ft. lbs.)