subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Trailing Arm > < Front Suspension|Page 4577
Page 3
background image

^

Check that hose clip is positioned properly.

^

Check brake hose for twisting, or excessive tension.

^

Models equipped with ABS: Do not subject ABS sensor harness to excessive tension.

6. Be sure to bleed air from brake system.
7. Lower vehicle and tighten wheel nut. 

Tightening torque: 88 ± 10 Nm (65 ± 7 ft. lbs.).

8. Install rear seat backrest and rear seat cushion.

NOTE:  Check wheel alignment and adjust if necessary.

Trailing Arm > < Front Suspension|Page 4577