Legacy Postal Wagon AWD F4-2.2L SOHC (1998)
![background image](/subaru/legacy_postal__wagon_awd/f4-2.2l_sohc/Page-1655003.png)
3. Support the bearing housing (Wheel side down) with 927430000 (small end up). Remove the inner seal, snap-ring and bearing.
4. Invert the stand and bearing housing. Insert 927440000 into the bearing housing as shown. Apply pressure until the bearing race is removed. [If
servicing SVX wheel bearing use 28099PA010. Use the small end only].