Legacy Postal Wagon AWD F4-2.2L SOHC (1998)
Shift Solenoid: Service and Repair
SHIFT SOLENOID, DUTY SOLENOID AND VALVE BODY
1. Removal
1) Clean transmission exterior.
2) Drain ATF completely.
NOTE: Tighten ATF drain plug after draining ATF.
Tightening torque: 25 ± 2 Nm (18.1 ± 1.4 ft. lbs.)
3) Remove oil pan and gasket.
NOTE: Drain oil into a container.
4) Disconnect solenoid valve connectors. Remove connectors from clips and disconnect connectors at 4 places.
5) Remove oil strainer. Disconnect oil pipe by removing the two bolts, and remove four bolts and oil strainer.
NOTE: Be careful because oil flows from oil strainer.