Legacy Sedan 2WD F4-2.2L SOHC (1990)
a. On all except Justy and Legacy, using wrench tool No. 925590000 and spacer tool No. 926440000 or equivalent, slowly rotate caliper piston
until seated into caliper bore. Ensure notch in piston face is aligned with tab on brake pad backing plate.
b. On Justy, Legacy and SVX, push piston into caliper body. When piston is difficult to insert, loosen the air bleeder, then push into place.
c. On all models, refer to Fig. 5 for tightening values.
d. After completing installation, depress brake pedal several times to seat brake pads against rotor. If pedal stroke is excessive, bleed hydraulic
system as needed.