Legacy Sedan 2WD F4-2.2L SOHC (1990)
(c) Tighten nuts which install front catalytic converter to center exhaust pipe.
Tightening torque: 35 ± 5 Nm (3.6 ± 0.5 kg-m, 26.0 ± 3.6 ft. lbs.)
(d) Tighten bolt which installs front exhaust pipe on bracket.
Tightening torque: 24 ± 3 Nm (2.4 ± 0.3 kg-m, 17.4 ± 2.2 ft. lbs.)
10. Connect connector to rear oxygen sensor. (Except California 2200 cc model)
11. Lower the vehicle.
CAUTION: At this time, lower lifting device and release steel cables.
12. Remove lifting device and steel cables.