Legacy Sedan 4WD F4-2.2L SOHC (1992)
hold.
a. When the ignition switch is Set to on, the brake pedal must not be depressed.
b. Engine must not operate.
2. CONDITIONS FOR COMPLETION OF SEQUENCE CONTROL
1) When the speed of at least one wheel reaches 10 km/h (6 MPH), the operation is returned to the normal control mode.
2) When L terminal is separated from ground, the operation is returned to the normal control mode.
3) When K terminal is no longer ground with the body, the operation is returned to the normal control mode.
4) When the brake pedal is released during sequence control and the braking lamp switch is set to off, the operation is returned to the normal
control mode.
5) After completion of the sequence control, the operation is returned to the normal control mode.