Legacy Sedan 4WD F4-2.2L SOHC (1992)
5. Tighten bolts which install oil pan onto engine block.
Tightening torque: 5 Nm (0.5 kg-m,3.6 ft. lbs.)
6. Tighten drain plug.
Tightening torque: 44 ± 4.8 Nm (4.5 ± 0.5 kg-m, 33 ± 3.6 ft. lbs.)
CAUTION: Replace drain plug gasket with new one.
7. Lower engine onto front crossmember.
8) Tighten nuts which install front cushion rubber onto front crossmember.
Tightening torque: 69 ± 15 Nm (7.0 ± 1.5 kg-m, 51 ± 11 ft. lbs.)
9. Install front exhaust pipe.
CAUTION: Always use the new gaskets.
(a) Place front exhaust pipe on bracket.
(b) Tighten nuts which install front exhaust pipe on engine.
Tightening torque: 30 ± 5 Nm (3.1 ± 0.5 kg-m, 22.4 ± 3.6 ft. lbs.)
