Legacy Sedan 4WD F4-2.2L SOHC (1992)
Neutral Switch Connector
CHECK ECU VOLTAGE
With ignition "ON," measure voltage between ECU connector terminal and ground as follows:
Connector & terminal:
Voltage: [1]
(B58)10-Ground
0V (neutral position)
CHECK NEUTRAL SWITCH
1.
Disconnect transmission connectors.
2.
Measure resistance between neutral switch terminals while shifting select lever from "N" to any other position:
Connector & terminal:
Resistance:
(E15)1-(E15)3
0 Ohms ("N" range)
1M Ohms min. (other than "N" range)
CHECK HARNESS BETWEEN ECU AND NEUTRAL SWITCH
1.
Disconnect ECU and neutral switch connectors.
2.
Measure resistance between ECU and neutral switch connectors and ground as follows:
Connector & terminal:
Resistance:
(B58)10-(E17)1
0 Ohms
(E17)1-Ground
1M Ohms min.
(E17)2-Ground
0 Ohms