Legacy Sport Utility LTD AWD F4-2.5L DOHC (1999)
Sunroof / Moonroof Motor: Testing and Inspection
SUNROOF MOTOR
1. Apply battery voltage between 1-pin connector (Except OUTBACK) or terminal No.1 (OUTBACK) and body ground wire.
2. Make sure that sunroof motor moves when connecting terminals as describe:
Except OUTBACK
-
Connect between terminals No.3 and 4 (OPEN)
-
Connect between terminals No.6 and 4 (CLOSE)
-
Connect between terminals No.5 and 4 (TILT UP)
-
Connect between terminals No.2 and 4 (TILT DOWN)
OUTBACK (Rear)
-
Connect between terminals No.2 and 3 (OPEN)
-
Connect between terminals No.6 and 3 (CLOSE)
OUTBACK (Front)
-
Connect between terminals No.1 and 2 (TILT UP)
-
Connect between terminals No.2 and 1 (TILT DOWN)