Legacy Sport Utility LTD AWD F4-2.5L DOHC (1999)
7. Be sure to bleed air from the system.
CAUTION: After replacing PHV cable or clutch cable with new one, operate clutch pedal about 30 times as a running-in operation prior to
adjustment.
D: ADJUSTMENTS
Confirm stopping and starting performance by activating hill-holder on an uphill road of 3° or higher inclination.
1. If vehicle does not stop; Tighten adjusting nut of PHV cable.
2. If vehicle does not start properly;
-
Case A - When hill-holder is released later than engagement of clutch (engine tends to stall): Loosen adjusting nut gradually until smooth
starting is enabled.
-
Case B - When hill-holder is released earlier than engagement to clutch (vehicle slips down slightly): Tighten adjusting nut so that hill-holder
is released later than engagement of clutch (status in Case A). Then make adjustment the same as in Case A.
NOTE:
-
Whenever turning adjusting nut, prevent PHV cable from revolving as shown in figure.