Legacy Sport Utility LTD AWD F4-2.5L DOHC (1999)
(3) Align single line mark on right-hand exhaust camshaft sprocket with notch on belt cover. (Make sure double lines on intake camshaft and
exhaust camshaft sprockets are aligned.)
(4) Align single line mark on left-hand exhaust camshaft sprocket with notch on belt cover by turning sprocket counter-clockwise (as viewed from
front of engine).
(5) Align single tine mark on left-hand intake camshaft sprocket with notch on belt cover by turning sprocket clockwise (as viewed from front of
engine). Ensure double tines on intake and exhaust camshaft sprockets are aligned.
(6) Ensure camshaft and crankshaft sprockets are positioned as shown.
WARNING: INTAKE AND EXHAUST CAMSHAFTS FOR THIS DOHC ENGINE CAN BE INDEPENDENTLY ROTATED
WITH TIMING BELTS REMOVED. AS CAN BE SEEN FROM THE FIGURE, IF INTAKE AND EXHAUST VALVES ARE
LIFTED SIMULTANEOUSLY, THEIR HEADS WILL INTERFERE WITH EACH OTHER, RESULTING IN BENT VALVES.