subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Fuel Filler Hose|Removal and Installation|Page 2032 > < Evaporative Shut Valve|Locations|Page 2027
Page 1
background image

Fuel Filler Hose: Service and Repair
Removal and Installation

REMOVAL 

1. Release fuel pressure.

2. Open fuel flap lid, and remove fuel filler cap.

3. Disconnect battery ground cable.

4. Drain fuel from fuel tank.

5. Remove screws which install fuel filler pipe on filler lid open.
6. Remove wheel nuts of rear right side.
7. Lift-up the vehicle.

Fuel Filler Hose|Removal and Installation|Page 2032 > < Evaporative Shut Valve|Locations|Page 2027