Legacy Sport Utility LTD AWD F4-2.5L DOHC (1999)
Throttle Position Sensor: Adjustments
1. Turn ignition switch to OFF.
2. Loosen throttle position sensor holding screws.
3. When using voltage meter;
1. Take out ECM.
2. Turn ignition switch to ON.
3. Adjust throttle position sensor to the proper position to allow the voltage signal to ECM to be in specification.
Connector & terminal / (B84) No.6 - (B84) No.20
Specified voltage / 0.45 - 0.55 V [Fully closed.]
4. Tighten throttle position sensor holding screws.
Tightening torque:
2.2 ± O.2 Nm (0.22 ± 0.02 kg.m, 1.6 ± 0.1 ft.lb)
4. When using Subaru Select Monitor;
NOTE: For detailed operation procedures, refer to the Subaru Select Monitor Operation Manual.