Legacy Sport Utility LTD AWD F4-2.5L DOHC (1999)
The transfer hydraulic pressure control module is fitted with the transfer valve body attached to the rear end face of the transmission case via separate
plate.
The hydraulic oil of the transfer hydraulic pressure control module is led from the oil pump delivery pressure circuit on the transmission case front to
the transmission case rear. From there it is further fed to the hydraulic circuit of the transfer valve body.
The hydraulic oil pressure (line pressure) is regulated by the duty solenoid C (transfer) and transfer control valve for obtaining optimum rear torque
distribution corresponding to the driving conditions.
-
The pilot pressure is regulated to the transfer duty pressure by the duty solenoid C (transfer) whose duty ratio is controlled by the TCM
corresponding to the driving condition. (The transfer duty pressure varies with the degree of duty control.)
-
The transfer duty pressure is applied to the transfer control valve.
-
The line pressure is led also to the transfer control valve where the pressure is regulated to the transfer clutch pressure by the transfer duty
pressure. (The transfer clutch pressure varies with the transfer duty pressure.)
-
The transfer clutch pressure is applied to the transfer clutch and causes the clutch to be engaged.
In this way, the transfer clutch pressure is varied so that optimum rear torque distribution can be achieved which corresponds to the vehicle driving
conditions.