Legacy Sport Utility LTD AWD F4-2.5L DOHC (1999)
2. Disconnect connector (AB1) from body harness connector (B31), and connect connector (B31) to test harness A connector (1A).
3. Measure resistance between connector (5A) terminal and chassis ground.
CHECK: Is resistance less than 10 Ohms?
YES:
Go to step 5Y7.
NO:
Repair body grounding circuit.
5Y7: GROUNDING CIRCUIT INSPECTION
Measure resistance between connector (5A) terminal and chassis ground.
CHECK: Is resistance less than 10 Ohms?
YES:
Go to step 5Y8.
NO:
Repair body grounding circuit.
5Y8: INSPECTION OF AIRBAG MAIN HARNESS
1. Connect connectors (AB1) and (B31). Disconnect connector (AB6) from airbag control module, and connect it to test harness E connector
(1E).
2. Measure resistance between each test harness E connector (2E) terminal and chassis ground.