Legacy Wagon 4WD F4-2.5L DOHC (1996)
Conditions For ABS Sequence Control
NOTE: When select monitor is used, control operation starts at point A. It is not required to operate brake lamp switch for starting ABS sequence
control operation. The patterns from IGN key ON to the point A show that operation is started by diagnosis connector.
Checking the Hydraulic Unit TCS Operation
CHECKING THE HYDRAULIC UNIT TCS OPERATION
Checking The Hydraulic Unit TCS Operation By Pressure Gauge
1) Lift-up vehicle and remove wheels.
2) Disconnect the air bleeder screws from the FL and FR caliper bodies.