Legacy Wagon 4WD F4-2.5L DOHC (1996)
4) Connect oil pressure gauge hose to cylinder block.
5) Start the engine, and measure oil pressure.
Oil pressure: (engine oil temperature: 80°C (176°F))
98 kPa (1.0 kg/cm2, 14 psi) or more at 800 rpm
294 kPa (3.0 kg/cm2, 43 psi) or more at 5,000 rpm
CAUTION:
^
If oil pressure is out of specification, check oil pump, oil filter and lubrication line.
^
If oil pressure warning light is turned ON and oil pressure is in specification, replace oil pressure switch.
6) After measuring oil pressure, install oil pressure switch.
Tightening torque: 25 ± 3 Nm (2.5 ± 0.3 kg-m, 18.1 ± 2.2 ft. lbs.)
7) Install generator and V-belt in the reverse order of removal, and adjust the V-belt deflection.