Legacy Wagon 4WD F4-2.5L DOHC (1996)
1) If alignment mark and/or arrow mark (which indicates rotation direction) on timing belt fade away, put new marks before removing timing belt
as follows:
(1) Turn crankshaft using ST, and align alignment marks on crankshaft sprocket, left-hand intake camshaft sprocket, left-hand exhaust
camshaft sprocket, right-hand intake camshaft sprocket and right hand exhaust camshaft sprocket with notches of belt cover and cylinder
block. ST 499987500 CRANKSHAFT SOCKET
(2) Using white paint put alignment and/or arrow marks on timing belts in relation to the sprockets.
Z1: 54.5 tooth length
Z2: 51 tooth length
Z3: 28 tooth length