Legacy Wagon 4WD F4-2.5L DOHC (1996)
Fluid packing:
THREE BOND 1207C or equivalent
5) Apply fluid packing to matching surfaces and install oil separator cover.
Fluid packing:
THREE BOND 1215 or equivalent
6) Install drive plate.
To lock crankshaft, use ST. ST 498497100 CRANKSHAFT STOPPER
7) Install housing cover.
8) Installation of oil pump
(1) Discard front oil seal after removal. Replace with a new one by using ST. ST 499587100 OIL SEAL INSTALLER
(2) Apply fluid packing to matching surface of oil pump.
Fluid packing:
THREE BOND 1215 or equivalent