Legacy Wagon 4WD F4-2.5L DOHC (1996)
Main Relay (Computer/Fuel System): Description and Operation
PURPOSE/OPERATION
FUEL PUMP CONTROL RELAY
The Engine Control Module (ECM) receives a signal emitted from the Crankshaft Position Sensor and turns the Fuel Pump Relay "ON" or "OFF"
to control Fuel Pump operation. To improve safety, the Fuel Pump will stop if the Engine stalls with the Ignition Switch "ON".
POWER SUPPLY CONTROL RELAY
When the Engine Control Module (ECM) receives an "ON" signal emitted from the Ignition Switch, current flows through the Main Relay. This
turns the Ignition Relay "ON" so that power is supplied to the Fuel Injectors, Mass Air Flow Sensor, Idle Air Control Valve, etc..