Legacy Wagon 4WD F4-2.5L DOHC (1996)
NOTE: The connector must be connected to the engine front end of the engine coolant hose.
3. Fasten engine harness to engine coolant hose with band clip.
NOTE: Make sure that the throttle linkage does not interfere with other parts in the operating area.
4. Install operating cylinder. (MT vehicle only)
Tightening torque:
37 ± 3 N.m (3.8 ± 0.3 kg-m, 27.3 ± 2.2 ft-lb)
NOTE: Apply grease to contact point of release lever and operating cylinder rod.