Legacy Wagon 4WD F4-2.5L DOHC (1996)
(2) Remove four bolts which secure rear cover.
(3) Remove the following parts from front casing.
CAUTION: Discard old seal washer; replace with a new one.
2) Control valve
Slightly loosen outlet connector, and remove connector.
Remove the following parts for pump casing.
-
Spool valve assembly
-
Flow control spring
-
Connector
-
O-ring
3) Shaft
(1) Remove snap ring from front casing.
(2) Remove shaft using a hand press.
CAUTION:
-
Discard old drive shaft assembly; replace with a new one.
-
Be careful not to scratch or dent casing's surface which serves as a seal.