Legacy Wagon 4WD F4-2.5L DOHC (1996)
(3) Using ST, press-fit shaft assembly into front body and mount snap ring. ST 340099AA020 INSTALLER
NOTE: Turn snap ring to ensure that it fits right into the groove.
3) Cartridge assembly
(1) Apply specified hydraulic oil to 0-rings and fit them into front casing.
(2) Install side plate to front casing.
CAUTION: Use care not to let side plate gall.
(3) Mount rotor onto shaft.
(4) Install 10 vanes into rotor with their nose radius facing toward cam ring.
(5) Install cam ring to front casing, securing with knock pins.
CAUTION: Do not use hammer to fit knock pins in position.
4) Rear cover
(1) Mount seal washer on front casing.
(2) With knock pin positions aligned, install rear cover.
Tightening torque:
16 ± 2 Nm (1.6 ± 0.2 kg-m, 11.6 ± 1.4 ft-Ib.)