subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Steel Wheel and Tire|Page 5217 > < Aluminum Alloy Wheel|Page 5214
Page 1
background image

Wheels: Service and Repair
Steel Wheel and Tire

STEEL WHEEL AND TIRE 

1) Deformation or damage on the rim can cause air leak age. Check the rim flange for deformation, crack, or damage, and repair or replace as

necessary.

2) Take stone, glass, nail etc. oft the tread groove.

3) Replace tire:

-

when large crack on side wall, damage or crack on tread is found.

-

when the "tread wear indicator" appears as a solid band across the tread.

CAUTION: 
-

When replacing a tire, make sure to use only the same size, construction and load range as originally installed.

-

Avoid mixing radial, belted bias or bias tires on the vehicle.

Inspection Of Wheel Runout 

1) Jack-up vehicle until wheels clear the floor.
2) Slowly rotate wheel to check rim "runout" using a dial gauge.

3) If rim runout exceeds specifications, remove tire from rim and check runout while attaching dial gauge to positions shown in figure.
4) If measured runout still exceeds specifications, replace the wheel.

Steel Wheel and Tire|Page 5217 > < Aluminum Alloy Wheel|Page 5214