Loyale Sedan (3 Door) 4WD F4-1781cc 1.8L SOHC Turbo (1990)
(c) Raise tensioner No. 2 using TENSIONER WRENCH (499007000) until it stops. then tighten bolt (D) temporarily.
NOTE: Cover the tip of tensioner wrench with a rubber hose or waste cloth to prevent crankshaft or pulley from being damaged.
8. Install belt idler to cylinder block, using care not to turn over seal.
Tightening torque:
39 - 47 N-m (4.0 - 4.8 kg-m, 29 - 35 ft-lb).
9. Install timing belt.
(a) Install sprocket No. 2 and sprocket to crankshaft.
NOTE: Sprocket No. 2 can be identified by the absence of dowel pin.
(b) Install crankshaft pulley to crankshaft, and tighten bolt temporarily.