subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Sensors and Switches - Transfer Case > < Transmission Speed Sensor, M/T|Locations|Page 3115
Page 1
background image

Transmission Speed Sensor: Testing and Inspection

Speed Sensor 1

1.

Disconnect electrical connector.

2.

Connect a volt meter between terminals.

3.

Drive vehicle at 6 mph (10 km/h) and observe voltage. Meter should read approximately 1 V.

4.

With vehicle stopped, measure resistance between terminals. It should be 500 ohms.

Sensors and Switches - Transfer Case > < Transmission Speed Sensor, M/T|Locations|Page 3115