Loyale Sedan (4 Door) 4WD F4-1781cc 1.8L SOHC Turbo (1990)
Fig. 2 Front Toe-in Adjustment
1.
Loosen both left and right tie rod locknuts, Fig. 2.
2.
Turn left and right tie rods an equal amount until toe-in is within specifications.
3.
To increase toe-in, turn both tie rods counterclockwise an equal amount.
Rear Toe-In
Fig. 3 Outer Arm Mounting Bolts
1.
Raise and support vehicle.
2.
Remove rear wheels.
3.
Loosen outer arm mounting bolts, Fig. 3.
4.
If toe-in is excessive, tighten outer arm mounting bolts while pushing end of spindle towards rear of vehicle.
5.
If toe-out is excessive, tighten outer arm mounting bolts while pulling end of spindle toward front of vehicle.
6.
Tighten outer arm attaching mounting bolt.