Outback F4-2.5L (2008)
Glove Compartment: Service and Repair
GLOVE BOX
REMOVAL
1. Disconnect the ground cable from the battery.
2. Remove the console box.
3. Remove the console front panel.
NOTE: For the AT model, remove the ring indicator. For the MT model, remove the shift knob.
4. Remove the console side garnish.
5. Remove the front inside scuff plate (A) and front pillar lower trim (B). <Ref. to REMOVAL, Lower Inner Trim.>
6. Remove the clips, and remove the glove box lower cover.