Outback F4-2.5L (2008)
Spoiler: Service and Repair
ROOF SPOILER
Roof Spoiler
REMOVAL
1. Disconnect the ground cable from the battery.
2. Remove the rear gate trim.
3. Disconnect the connector of high-mounted stop light and the washer hose of rear washer.
4. Remove the nut and plastic caps.
5. Remove the clips, and remove the roof spoiler.
INSTALLATION
Install in the reverse order of removal.
Tightening torque: 4.5 N.m (0.46 kgf-m, 3.32 ft-lb)